Switch Aruba - VNS

Thiết bị Switch H3C L2+ LS-5120V3-20P-LI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 01:32:39 +0000

Thông số kỹ thuật

Specifications
Switching capacity	40Gbps
Packet forwarding rate	30Mpps
Dimensions (W × D × H)	330×230×43.6mm
Weight	≤ 2 kg
Management port	1 console port
Service ports	16 x 10/100/1000TX + 4 x SFP
Input voltage	AC: The rated voltage range is 100V to 240V, 50/60Hz
Total power consumption	MIN: AC: 9W MAX: AC: 23W
Operating temperature	-5℃ to 45℃
Relative humidity (non-condensing)	5% RH to 95% RH, non-condensing
Link aggregation	GE port aggregation Static aggregation Dynamic aggregation Multichassis link aggregation
Stacking	IRF2
Traffic control	802.3x traffic control and half-duplex backpressure
Jumbo Frame	Supported
PoE+ power	N/A
MAC address table	Blackhole MAC address Setting the maximum number of port MAC addresses to be learned
VLAN	Port-based VLAN QinQ Voice VLAN Protocol VLAN MAC VLAN
ARP	ARP Detection ARP speed limit
ND	Supported
VLAN virtual port	Supported
DHCP	DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Option 82
DNS	Static domain name resolution Dynamic domain name resolution for the client IPv4 and IPv6 address
Routing protocols	IPv4/IPv6 static routing RIP/RIPng, OSPFV1/V2/V3
Broadcast/ Multicast/ Unicast storm suppression	Storm suppression based on port bandwidth rate percentage Storm suppression based on PPS
Smart Link	Supported
Layer 2 ring network protocols	STP/RSTP/MSTP protocols STP Root Protection RRPP
QoS/ACL	Packet filter SP/WRR/SP+WRR queue scheduling Bidirectional ACL Port-based speed limit Traffic-based redirection
Mirroring	Port mirroring Traffic mirroring
Security	Hierarchical user management and password protection SSH2.0 Port isolation 802.1X Port security MAC address authentication IP Source Guard HTTPs EAD
Loading and upgrading	Loading and upgrading through File Transfer Protocol (FTP) Loading and upgrading through Trivial File Transfer Protocol (TFTP)
Management	Configuration from Command Line Interface (CLI) Remote configuration from Telnet Configuration through the console port Simple Network Management Protocol (SNMP) Remote Monitoring (RMON) alarms, events, and historical records iMC network management system WEB network management System log Alarming based on severity IRF NTP
Maintenance	Debugging information output Ping and Tracert Telnet remote maintenance NQA DLDP Virtual Cable Test

Bài viết Thiết bị Switch H3C L2+ LS-5120V3-20P-LI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 8G 2SFP 2GT EI (R8J42A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 15:07:33 +0000

Thông số kỹ thuật

Mã sản phẩm	R8J42A
Hệ điều hành	HPE Firmware
Routing / Switching	Layer 3
Quản lý	Managed
Cổng kết nối
LAN Ports	8 RJ-45 autosensing 10/100/1000 ports; Duplex: Ports 1-8 support 10BASE-T/100BASE-TX, 1000BASE-T (full only)
SFP Ports	4 port combo unit with 2 SFP 1GbE or 2 GT ports and 2GT ports
Additional ports and slots	1 RJ-45 serial console port
Memory and Processor
Memory	512 GB SDRAM , 256 MB Flash
Packet Buffer	N/A
Hiệu suất
Throughput	18 Mpps
Switching Capacity	24 Gbps
MAC Address Table Size	16,384 entries
Routing table size	1024 entries
1000 Mb latency	< 5 s
10 Gbps latency	< 3 s
Đặc điểm dòng điện
Frequency	50-60Hz
Voltage	100 VAC–240 VAC
Maximum power rating	15 W
PoE power	N/A
Quản lý
Management	IMC; SmartMC, command-line interface; web browser; SNMP manage
Mounting
Mounting	Mounts in an EIA standard 19 inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately)
Thông số vật lý
Fan	Fixed
Kích thước	10.47(w) x 6.3 (d) x 1.72(h) in. (26.6 x 16 x 4.36 cm) (1U height)
Trọng lượng	3.3 lb (1.5 kg)
Môi Trường
Operating temperature	23°F to 113°F (–5°C to 45°C)
Operating relative humidity	10% to 95%, noncondensing

Bài viết Thiết bị Switch HPE 5140 8G 2SFP 2GT EI (R8J42A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 48G PoE+ 4SFP+ EI (JL824A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 15:05:51 +0000

Thông số kỹ thuật

Mã sản phẩm	JL824A
Hệ điều hành	HPE Firmware
Routing / Switching	Layer 3
Quản lý	Managed
Cổng kết nối
LAN Ports	48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-48 support 10BASE-T/100BASE-TX, 1000BASE-T (full only)
SFP Ports	4 SFP+ 10GbE ports
Additional ports and slots	1 RJ-45 serial console port
Memory and Processor
Memory	512 GB SDRAM , 256 MB Flash
Packet Buffer	N/A
Hiệu suất
Throughput	131 Mpps
Switching Capacity	176 Gbps
MAC Address Table Size	16,384 entries
Routing table size	1024 entries
1000 Mb latency	< 5 s
10 Gbps latency	< 3 s
Đặc điểm dòng điện
Frequency	50-60Hz
Voltage	100 VAC–240 VAC
Maximum power rating	478W
PoE power	370W PoE+
Quản lý
Management	IMC; SmartMC, command-line interface; web browser; SNMP manage
Mounting
Mounting	Mounts in an EIA standard 19 inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately)
Thông số vật lý
Fan	Fixed
Kích thước	17.32 in. (w) x 14.17 in. (d) x 1.72 in. (h) (44 cm x 36 cm x 4.36 cm) (1U height)
Trọng lượng	17.64 lb (8 kg)
Môi Trường
Operating temperature	23°F to 113°F (–5°C to 45°C)
Operating relative humidity	10% to 95%, noncondensing

Bài viết Thiết bị Switch HPE 5140 48G PoE+ 4SFP+ EI (JL824A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 48G POE+ 2SFP+ 2XGT EI (JL825A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 15:04:04 +0000

Thông số kỹ thuật

Detailed Product Description	HPE FlexNetwork 5140 EI switch with 48 1GbE, power-over-Ethernet-plus ports (up to 370W), 2 SFP+ ports and 2 1/10GBASE-T ports
External I/O Ports	(48) RJ-45 autosensing 10/100/1000 ports (2) SFP+ fixed 1000/10000 SFP+ ports (2) RJ-45 1/10GBASE-T ports
PoE Capability	370 W PoE+
Management Features	IMC – Intelligent Management Center, SmartMC, Command-line interface, Web browser, SNMP manager
Stacking Capabilities	IRF 9 switches
Performance
Routing/switching Capacity	176 Gbps
Throughput	up to 131 Mpps
Power
Input Voltage	100 – 240 VAC, rated -54 to -57 VDC, rated (depending on power supply chosen)
Power Consumption Description	430 W (maximum)
Dimensions
Product Dimensions	1.72 x 17.32 x 12.6 in 4.36 x 44 x 32 cm
Weight	13.23 lbs 6 kg

Bài viết Thiết bị Switch HPE 5140 48G POE+ 2SFP+ 2XGT EI (JL825A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 48G 4SFP+ EI (JL829A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 15:02:21 +0000

Thông số kỹ thuật

Mã sản phẩm	JL829A
Hệ điều hành	HPE Firmware
Routing / Switching	Layer 3
Quản lý	Managed
Cổng kết nối
LAN Ports	48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1–48 support 10BASE-T/ 100BASE-TX, 1000BASE-T (full only)
SFP Ports	4 SFP+ 10GbE ports
Additional ports and slots	1 RJ-45 serial console port
Memory and Processor
Memory	512 GB SDRAM , 256 MB Flash
Packet Buffer	N/A
Hiệu suất
Throughput	131 Mpps
Switching Capacity	176 Gbps
MAC Address Table Size	16,384 entries
Routing table size	1024 entries
1000 Mb latency	< 5 s
10 Gbps latency	< 3 s
Đặc điểm dòng điện
Frequency	50-60Hz
Voltage	100 VAC–240 VAC
Maximum power rating	44W
PoE power	N/A
Quản lý
Management	IMC; SmartMC, command-line interface; web browser; SNMP manage
Mounting
Mounting	Mounts in an EIA standard 19 inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately)
Thông số vật lý
Fan Tray	Airflow direction is from side to back
Kích thước	17.32 in. (w) x 9.04 in. (d) x 1.72 in. (h) (44 cm x 23 cm x 4.36 cm) (1U height)
Trọng lượng	7.22 lb (3.5 kg)
Môi Trường
Operating temperature	23°F to 113°F (–5°C to 45°C)
Operating relative humidity	10% to 95%, noncondensing

Bài viết Thiết bị Switch HPE 5140 48G 4SFP+ EI (JL829A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 24G SFP w/8G Combo 4SFP+ EI (JL826A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 15:00:38 +0000

Thông số kỹ thuật

I/O ports and slots	16 x SFP 100/1000 Mbps ports
	8 x SFP dual-personality ports – 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports
	4 x SFP+ fixed 1000/10000 SFP+ ports
Additional ports and slots	1 x RJ-45 serial console port
Power supplies	2 x power supply slots 1 x minimum power supply required (ordered separately)
Physical characteristics
Dimensions	17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
Weight	13.23 lb (6kg)
Memory and processor	512 MB SDRAM, 256 MB flash;
Mounting and enclosure	Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency	< 5 µs
10 Gbps Latency	< 3 µs
Throughput	96 Mpps
Routing/Switching capacity	128 Gbps
Routing table size	512 entries (IPv4), 256 entries (IPv6)
MAC address table size	16384 entries
Environment
Operating temperature	23°F to 113°F (-5°C to 45°C)
Operating relative humidity	10% to 90%, noncondensing
Non-operating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage relative humidity	5% to 95%, noncondensing
Acoustic	Low-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779
Electrical characteristics
Frequency	50/60 Hz
Maximum heat dissipation	102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC powered units heat dissipation is 130 BTU/hr min, 232 BTU/hr max.
Voltage	100 – 240 VAC -48 to -60 VDC
Current	5 A
Maximum power rating	60 W
Idle power	30 W
Notes	– Idle power is the actual power consumption of the device with no ports connected. – Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. – Power Ratings for AC Power Supply indicated above. – For DC input power, Idle Power is 38W and Max is 68W. – DC Max input current is 8A. Units are supplied without a power supply. Customer must buy 1 or 2 JD362B (AC) or JD366B (DC) power supply.
Safety	UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
Emissions	FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993
Immunity
Generic	EN 55024
ESD	EN300 386
Management	IMC – Intelligent Management Center; SmartMC;command-line interface; Web browser; SNMP Manager

Bài viết Thiết bị Switch HPE 5140 24G SFP w/8G Combo 4SFP+ EI (JL826A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 24G PoE+ 4SFP+ EI (JL827A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 14:56:31 +0000

Thông số kỹ thuật

Mã sản phẩm	JL827A
Hệ điều hành	HPE Firmware
Routing / Switching	Layer 3
Quản lý	Managed
Cổng kết nối
LAN Ports	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-24 support 10BASE-T/100BASE-TX, 1000BASE-T (full only)
SFP Ports	4 SFP+ 10GbE ports
Additional ports and slots	1 RJ-45 serial console port
Memory and Processor
Memory	512 GB SDRAM , 256 MB Flash
Packet Buffer	N/A
Hiệu suất
Throughput	95 Mpps
Switching Capacity	128 Gbps
MAC Address Table Size	16,384 entries
Routing table size	1024 entries
1000 Mb latency	< 5 s
10 Gbps latency	< 3 s
Đặc điểm dòng điện
Frequency	50-60Hz
Voltage	100 VAC–240 VAC
Maximum power rating	451W
PoE power	370W PoE+
Quản lý
Management	IMC; SmartMC, command-line interface; web browser; SNMP manage
Mounting
Mounting	Mounts in an EIA standard 19 inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately)
Thông số vật lý
Fan	Fixed
Kích thước	17.32 in. (w) x 10.24 in. (d) x 1.72 in. (h) (44 cm x 26 cm x 4.36 cm) (1U height)
Trọng lượng	17.64 lb (8 kg)
Môi Trường
Operating temperature	23°F to 113°F (–5°C to 45°C)
Operating relative humidity	10% to 95%, noncondensing

Bài viết Thiết bị Switch HPE 5140 24G PoE+ 4SFP+ EI (JL827A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 24G POE+ 2SFP+ 2XGT EI (JL823A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 14:54:35 +0000

Thông số kỹ thuật

Detailed Product Description	HPE FlexNetwork 5140 EI switch with 24 1GbE, power-over-Ethernet-plus ports (up to 370W), 2 SFP+ ports and 2 1/10GBASE-T ports
External I/O Ports	(24) RJ-45 autosensing 10/100/1000 ports (2) SFP+ fixed 1000/10000 SFP+ ports (2) RJ-45 1/10GBASE-T ports
PoE Capability	370 W PoE+
Management Features	IMC – Intelligent Management Center, SmartMC, Command-line interface, Web browser, SNMP manager
Performance
Routing/switching Capacity	128 Gbps
Throughput	up to 96 Mpps
Stacking Capabilities	IRF 9 switches
Power
Input Voltage	100 – 240 VAC, rated -54 to -57 VDC, rated (depending on power supply chosen)
Power Consumption Description	420 W (maximum)
Dimensions
Product Dimensions	1.72 x 17.32 x 12.6 in 4.36 x 44 x 32 cm
Weight	9.92 lbs 4.5 kg

Bài viết Thiết bị Switch HPE 5140 24G POE+ 2SFP+ 2XGT EI (JL823A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 24G 4SFP+ EI (JL828A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 14:52:51 +0000

Thông số kỹ thuật

Tên sản phẩm	HPE FlexNetwork 5140-24G-4SFP+ EI (JL828A)
Mã sản phẩm	JL828A
Hệ điều hành	HPE Firmware
Routing / Switching	Layer 3
Quản lý	Managed
Cổng kết nối
LAN Ports	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1–24 support 10BASE-T/ 100BASE-TX, 1000BASE-T (full only)
SFP Ports	4 SFP+ 10GbE ports
Additional ports and slots	1 RJ-45 serial console port
Memory and Processor
Memory	512 GB SDRAM , 256 MB Flash
Packet Buffer	N/A
Hiệu suất
Throughput	95 Mpps
Switching Capacity	128 Gbps
MAC Address Table Size	16,384 entries
Routing table size	1024 entries
1000 Mb latency	< 5 s
10 Gbps latency	< 3 s
Đặc điểm dòng điện
Frequency	50-60Hz
Voltage	100 VAC–240 VAC
Maximum power rating	24W
PoE power	N/A
Quản lý
Management	IMC; SmartMC, command-line interface; web browser; SNMP manage
Mounting
Mounting	Mounts in an EIA standard 19 inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately)
Thông số vật lý
Fan Tray	Airflow direction is from side to back
Kích thước	17.32 in. (w) x 6.3 in. (d) x 1.72 in. (h) (44 cm x 16 cm x 4.36 cm) (1U height)
Trọng lượng	5.5 lb (2.5 kg)
Môi Trường
Operating temperature	23°F to 113°F (–5°C to 45°C)
Operating relative humidity	10% to 95%, noncondensing

Bài viết Thiết bị Switch HPE 5140 24G 4SFP+ EI (JL828A) đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch HPE 5140 24G 2SFP+ 2XGT EI (R8J41A)

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Wed, 01 Oct 2025 14:50:35 +0000

Thông số kỹ thuật

Detailed Product Description	HPE FlexNetwork 5140 EI switch with 24 1GbE ports, 2 SFP+ ports and 2 1/10GBASE-T ports
External I/O Ports	(24) RJ-45 autosensing 10/100/1000 ports (2) SFP+ fixed 1000/10000 SFP+ ports (2) RJ-45 1/10GBASE-T ports
Management Features	IMC – Intelligent Management Center, SmartMC, Command-line interface, Web browser, SNMP manager
Routing/switching Capacity	128 Gbps
Throughput	up to 96 Mpps
Stacking Capabilities	IRF 9 switches
Input Voltage	100 – 240 VAC, rated (depending on power supply chosen)
Power Consumption Description	33 W (maximum)
Weight (imperial)	5.51 lbs
Weight (metric)	2.5 kg
Product Dimensions (imperial)	1.72 x 17.32 x 6.3 in
Product Dimensions (metric)	4.36 x 44 x 16 cm

Bài viết Thiết bị Switch HPE 5140 24G 2SFP+ 2XGT EI (R8J41A) đã xuất hiện đầu tiên vào ngày VNS.