Switch H3C - VNS

Thiết bị Switch H3C L3 LS-6520X-24ST-SI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:29:09 +0000

Thông số kỹ thuật

Giao diện	24×1/10G SFP+ ports (2 Combo 1G/2.5G/5G/1 0G Base-T Multi-giga ports)
Khe mở rộng	N/A
Khả năng chuyển mạch Port	480Gbps
Tỉ lệ chuyển tiếp	357Mpps
PoE	Không hỗ trợ
Kích thước	440×360×43.6 mm
Trọng lượng	≤4.0kg
Môi trường	– Nhiệt độ hoạt động : -40℃ to 70℃ – Độ ẩm : 5% RH to 95% RH, không ngưng tụ
Layer 2 Switching
Mac Address	– Static MAC address – Blackhole MAC address – MAC learning limit
VLAN	– Port-based VLAN (up to 4094 VLANs) – Default VLAN – Private VLAN – QinQ and flexible QinQ – VLAN mapping – PVST+ and RPVST+
Loop-free redundant Layer 2 topology	– STP/RSTP/MSTP/PVST/PVST+ – STP Root Guard – BPDU Guard – BPDU Blocking and Root Guard – Link Detection (UDLD) – Digital Diagnostic Monitor (DDM) – G.8032 Ethernet ring protection switching (ERPS)
Layer 3
Virtualization	– Intelligent Resilient Framework 2 (IRF2) – Distributed device management – Distributed link aggregation – Distributed resilient routing – Stacking through standard Ethernet ports – Local device stacking and remote device stacking – LACP-, BFD-, and ARP-based multi-active detection (MAD)
IP Routing	– IPv4/IPv6 static routing – Dynamic routing such as RIP v1/2 and RIPng – Policy routing – Equal-cost multi-path routing (ECMP) – VRRP – OSPFv1/v2/v3 – BGP – IS-IS
DHCP	– DHCP/DHCPv6 Snooping – DHCP/DHCPv6 Relay – DHCP/DHCPv6 Client – DHCP/DHCPv6 server(EI) – DHCP option 82
VXLAN	– VXLAN L2 switching – VXLAN L3 routing – VXLAN VTEP – IS-IS+ENDP distributed control plane – MP-BGP+EVPN distributed control plane – OpenFlow+Netconf centralized control plane
Convergence
QoS/ACL	– Rate limit for receiving and transmitting packets – CAR – Eight output queues per port – Flexible queue scheduling algorithms based on both port and queue, including SP, WDRR, WRR, WFQ, and SP+WRR – 802.1p priority and DSCP priority – Layer 2 to Layer 4 packet filtering – Traffic classification based on source MAC, destination MAC, source IP, destination IP, port, protocol, and VLAN – Time range – WRED
Bảo mật
Tính năng bảo mật	– Hierarchical user management and password protection – MAC-based authentication – 802.1X – Storm constrain – AAA authentication – RADIUS authentication – HWTACACS – SSH2.0 – Port isolation – IP/Port/MAC binding – IP source guard – HTTPs – SSL – Public Key Infrastructure (PKI) – CPU protection – Control Plane Protection (CoPP), Wireless Intrusion Prevention System (WIPS) – ND Detection, RA Guard
Quản lý và bảo trì
Quản lý	– Loading and upgrading through XModem/FTP/TFTP – Zero Touch Provisioning – Configuration through CLI, Telnet, and console port – SNMPv1/v2c/v3 – Restful – Python – Job scheduler – ISSU – VCT – 802.1ag and 802.3ah – Simple Network Management Protocol – IMC network management system – System log – Alarming based on severity – NTP – Power, fan, and temperature alarming – Debugging information output – Ping and Tracert – Track – Telnet-based remote maintenance

Bài viết Thiết bị Switch H3C L3 LS-6520X-24ST-SI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L3 LS-6520X-16XT-SI

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:25:38 +0000

Thông số kỹ thuật

Giao diện	14× 1G/2.5G/5G/10G Base-T Multi-giga ports+ 2× 1/10G SFP Plus
Khe mở rộng	N/A
Khả năng chuyển mạch Port	320Gbps
Tỉ lệ chuyển tiếp	240Mpps
PoE	Không hỗ trợ
Kích thước	440×260×43.6 mm
Trọng lượng	≤3.4kg
Môi trường	– Nhiệt độ hoạt động : -40℃ to 70℃ – Độ ẩm : 5% RH to 95% RH, không ngưng tụ
Layer 2 Switching
Mac Address	– Static MAC address – Blackhole MAC address – MAC learning limit
VLAN	– Port-based VLAN (up to 4094 VLANs) – Default VLAN – Private VLAN – QinQ and flexible QinQ – VLAN mapping – PVST+ and RPVST+
Loop-free redundant Layer 2 topology	– STP/RSTP/MSTP/PVST/PVST+ – STP Root Guard – BPDU Guard – BPDU Blocking and Root Guard – Link Detection (UDLD) – Digital Diagnostic Monitor (DDM) – G.8032 Ethernet ring protection switching (ERPS)
Layer 3
Virtualization	– Intelligent Resilient Framework 2 (IRF2) – Distributed device management – Distributed link aggregation – Distributed resilient routing – Stacking through standard Ethernet ports – Local device stacking and remote device stacking – LACP-, BFD-, and ARP-based multi-active detection (MAD)
IP Routing	– IPv4/IPv6 static routing – Dynamic routing such as RIP v1/2 and RIPng – Policy routing – Equal-cost multi-path routing (ECMP) – VRRP – OSPFv1/v2/v3 – BGP – IS-IS
DHCP	– DHCP/DHCPv6 Snooping – DHCP/DHCPv6 Relay – DHCP/DHCPv6 Client – DHCP/DHCPv6 server(EI) – DHCP option 82
VXLAN	– VXLAN L2 switching – VXLAN L3 routing – VXLAN VTEP – IS-IS+ENDP distributed control plane – MP-BGP+EVPN distributed control plane – OpenFlow+Netconf centralized control plane
Convergence
QoS/ACL	– Rate limit for receiving and transmitting packets – CAR – Eight output queues per port – Flexible queue scheduling algorithms based on both port and queue, including SP, WDRR, WRR, WFQ, and SP+WRR – 802.1p priority and DSCP priority – Layer 2 to Layer 4 packet filtering – Traffic classification based on source MAC, destination MAC, source IP, destination IP, port, protocol, and VLAN – Time range – WRED
Bảo mật
Tính năng bảo mật	– Hierarchical user management and password protection – MAC-based authentication – 802.1X – Storm constrain – AAA authentication – RADIUS authentication – HWTACACS – SSH2.0 – Port isolation – IP/Port/MAC binding – IP source guard – HTTPs – SSL – Public Key Infrastructure (PKI) – CPU protection – Control Plane Protection (CoPP), Wireless Intrusion Prevention System (WIPS) – ND Detection, RA Guard
Quản lý và bảo trì
Quản lý	– Loading and upgrading through XModem/FTP/TFTP – Zero Touch Provisioning – Configuration through CLI, Telnet, and console port – SNMPv1/v2c/v3 – Restful – Python – Job scheduler – ISSU – VCT – 802.1ag and 802.3ah – Simple Network Management Protocol – IMC network management system – System log – Alarming based on severity – NTP – Power, fan, and temperature alarming – Debugging information output – Ping and Tracert – Track – Telnet-based remote maintenance

Bài viết Thiết bị Switch H3C L3 LS-6520X-16XT-SI đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L3 LS-6520X-16ST-SI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:23:30 +0000

Thông số kỹ thuật
Giao diện	16×1/10G SFP+ port 2 x Combo 1G/2.5G/5G/1 0G Base-T Multi-giga ports
Khe mở rộng	N/A
Khả năng chuyển mạch Port	320Gbps
Tỉ lệ chuyển tiếp	240Mpps
PoE	Không hỗ trợ
Kích thước	440×360×43.6 mm
Trọng lượng	≤3.9kg
Môi trường	– Nhiệt độ hoạt động : -40℃ to 70℃ – Độ ẩm : 5% RH to 95% RH, không ngưng tụ
Layer 2 Switching
Mac Address	– Static MAC address – Blackhole MAC address – MAC learning limit
VLAN	– Port-based VLAN (up to 4094 VLANs) – Default VLAN – Private VLAN – QinQ and flexible QinQ – VLAN mapping – PVST+ and RPVST+
Loop-free redundant Layer 2 topology	– STP/RSTP/MSTP/PVST/PVST+ – STP Root Guard – BPDU Guard – BPDU Blocking and Root Guard – Link Detection (UDLD) – Digital Diagnostic Monitor (DDM) – G.8032 Ethernet ring protection switching (ERPS)
Layer 3
Virtualization	– Intelligent Resilient Framework 2 (IRF2) – Distributed device management – Distributed link aggregation – Distributed resilient routing – Stacking through standard Ethernet ports – Local device stacking and remote device stacking – LACP-, BFD-, and ARP-based multi-active detection (MAD)
IP Routing	– IPv4/IPv6 static routing – Dynamic routing such as RIP v1/2 and RIPng – Policy routing – Equal-cost multi-path routing (ECMP) – VRRP – OSPFv1/v2/v3 – BGP – IS-IS
DHCP	– DHCP/DHCPv6 Snooping – DHCP/DHCPv6 Relay – DHCP/DHCPv6 Client – DHCP/DHCPv6 server(EI) – DHCP option 82
VXLAN	– VXLAN L2 switching – VXLAN L3 routing – VXLAN VTEP – IS-IS+ENDP distributed control plane – MP-BGP+EVPN distributed control plane – OpenFlow+Netconf centralized control plane
Convergence
QoS/ACL	– Rate limit for receiving and transmitting packets – CAR – Eight output queues per port – Flexible queue scheduling algorithms based on both port and queue, including SP, WDRR, WRR, WFQ, and SP+WRR – 802.1p priority and DSCP priority – Layer 2 to Layer 4 packet filtering – Traffic classification based on source MAC, destination MAC, source IP, destination IP, port, protocol, and VLAN – Time range – WRED
Bảo mật
Tính năng bảo mật	– Hierarchical user management and password protection – MAC-based authentication – 802.1X – Storm constrain – AAA authentication – RADIUS authentication – HWTACACS – SSH2.0 – Port isolation – IP/Port/MAC binding – IP source guard – HTTPs – SSL – Public Key Infrastructure (PKI) – CPU protection – Control Plane Protection (CoPP), Wireless Intrusion Prevention System (WIPS) – ND Detection, RA Guard
Quản lý và bảo trì
Quản lý	– Loading and upgrading through XModem/FTP/TFTP – Zero Touch Provisioning – Configuration through CLI, Telnet, and console port – SNMPv1/v2c/v3 – Restful – Python – Job scheduler – ISSU – VCT – 802.1ag and 802.3ah – Simple Network Management Protocol – IMC network management system – System log – Alarming based on severity – NTP – Power, fan, and temperature alarming – Debugging information output – Ping and Tracert – Track – Telnet-based remote maintenance

Bài viết Thiết bị Switch H3C L3 LS-6520X-16ST-SI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L3 LS-6520X-10XT-SI

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:20:55 +0000

Thông số kỹ thuật

Hãng sản xuất	H3C
Mã sản phẩm	LS-6520X-10XT-SI
Thông số kỹ thuật
Giao diện	8×1G/2.5G/5G/10G Base-T Multi-giga ports 2×1/10G SFP Plus
Khe mở rộng	N/A
Khả năng chuyển mạch Port	200Gbps
Tỉ lệ chuyển tiếp	240Mpps
PoE	Không hỗ trợ
Kích thước	440×260×43.6mm
Trọng lượng	≤3.4kg
Môi trường	– Nhiệt độ hoạt động : -40℃ to 70℃ – Độ ẩm : 5% RH to 95% RH, không ngưng tụ
Layer 2 Switching
Mac Address	– Static MAC address – Blackhole MAC address – MAC learning limit
VLAN	– Port-based VLAN (up to 4094 VLANs) – Default VLAN – Private VLAN – QinQ and flexible QinQ – VLAN mapping – PVST+ and RPVST+
Loop-free redundant Layer 2 topology	– STP/RSTP/MSTP/PVST/PVST+ – STP Root Guard – BPDU Guard – BPDU Blocking and Root Guard – Link Detection (UDLD) – Digital Diagnostic Monitor (DDM) – G.8032 Ethernet ring protection switching (ERPS)
Layer 3
Virtualization	– Intelligent Resilient Framework 2 (IRF2) – Distributed device management – Distributed link aggregation – Distributed resilient routing – Stacking through standard Ethernet ports – Local device stacking and remote device stacking – LACP-, BFD-, and ARP-based multi-active detection (MAD)
IP Routing	– IPv4/IPv6 static routing – Dynamic routing such as RIP v1/2 and RIPng – Policy routing – Equal-cost multi-path routing (ECMP) – VRRP – OSPFv1/v2/v3 – BGP – IS-IS
DHCP	– DHCP/DHCPv6 Snooping – DHCP/DHCPv6 Relay – DHCP/DHCPv6 Client – DHCP/DHCPv6 server(EI) – DHCP option 82
VXLAN	– VXLAN L2 switching – VXLAN L3 routing – VXLAN VTEP – IS-IS+ENDP distributed control plane – MP-BGP+EVPN distributed control plane – OpenFlow+Netconf centralized control plane
Convergence
QoS/ACL	– Rate limit for receiving and transmitting packets – CAR – Eight output queues per port – Flexible queue scheduling algorithms based on both port and queue, including SP, WDRR, WRR, WFQ, and SP+WRR – 802.1p priority and DSCP priority – Layer 2 to Layer 4 packet filtering – Traffic classification based on source MAC, destination MAC, source IP, destination IP, port, protocol, and VLAN – Time range – WRED
Bảo mật
Tính năng bảo mật	– Hierarchical user management and password protection – MAC-based authentication – 802.1X – Storm constrain – AAA authentication – RADIUS authentication – HWTACACS – SSH2.0 – Port isolation – IP/Port/MAC binding – IP source guard – HTTPs – SSL – Public Key Infrastructure (PKI) – CPU protection – Control Plane Protection (CoPP), Wireless Intrusion Prevention System (WIPS) – ND Detection, RA Guard
Quản lý và bảo trì
Quản lý	– Loading and upgrading through XModem/FTP/TFTP – Zero Touch Provisioning – Configuration through CLI, Telnet, and console port – SNMPv1/v2c/v3 – Restful – Python – Job scheduler – ISSU – VCT – 802.1ag and 802.3ah – Simple Network Management Protocol – IMC network management system – System log – Alarming based on severity – NTP – Power, fan, and temperature alarming – Debugging information output – Ping and Tracert – Track – Telnet-based remote maintenance

Bài viết Thiết bị Switch H3C L3 LS-6520X-10XT-SI đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L3 LS-5560S-28S-SI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:17:46 +0000

Thông số kỹ thuật

Datasheet H3C LS-5560S-28S-SI-GL
Item	S5560S-28S-SI
Port switching capacity	128 Gbps
Packet forwarding rate	96 Mpps
CPU	1 Core, 800MHz
Dimensions (H × W × D)	43.6 × 440 × 160 mm
Weight	< 2.5 kg
SDRAM/Flash	512MB/256MB
Maximum stacking num	9
Stacking bandwidth	80Gbps
Service ports	24× 10/100/1000Base-T autosensing Ethernet ports 4× 10G SFP+ ports
Power consumption	MIN: AC 10W MAX: AC 24W
Operating temperature	0ºC to 45ºC (32°F to 113°F)
Operating humidity	10% RH to 90% RH, non-condensing
Link aggregation	1G/10G port aggregation Static aggregation Dynamic aggregation Multichassis link aggregation
Jumbo frame	10,000 byte
MAC address table	Blackhole MAC address MAC learning limit
Flow control	802.3x flow control and half-duplex backpressure
VLAN	Port-based VLAN QinQ Voice VLAN MAC VLAN
ARP	ARP Detection ARP speed limit
ND	Supported
VLAN virtual port	Supported
DHCP	DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Option82
DNS	Static and Dynamic DNS IPV4 and IPV6
Routing protocols	IPV4/IPV6 static routing RIP/RIPng, OSPFV1/V2/V3
Strom suppression	Storm suppression based on port bandwidth percentage Storm suppression based on PPS Storm suppression based on BPS Broadcast traffic/Multicast traffic/Unknown unicast traffic suppression
Layer 2 ring network protocol	STP/RSTP/MSTP STP Root Protection Smart Link RRPP
Mirroring	Flow mirroring Port mirroring
QoS/ACL	Packet filter Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR Bidirectional ACL Port-based speed limiting Flow redirection Time-range 802.1p priority mapping and DSCP priority mapping
Layer 2 ring network protocol	STP/RSTP/MSTP/PVST+/RPVST+ STP Root Protection Smart Link RRPP
Multicast	IGMP Snooping v1/v2/v3 and MLD Snooping v1/v2 IGMP v1/v2/v3 and PIM-SM/PIM-SSM/PIM-DM
Security	Hierarchical user management and password protection MAC-based authentication 802.1X authentication RADIUS authentication, HWTACACS authentication SSH2.0 Port isolation Port security IP source guard Dynamic ARP detection BPDU guard and root guard HTTPs l EAD
Loading and upgrading	Loading and upgrading through FTP/TFTP
Management and maintenance	Configuration from CLI Login through Telnet, and the console port Simple Network Management Protocol (SNMP) Remote Monitoring (RMON) IMC network management system WEB management System log Alarming based on severity IRF2 NTP LLDP, LLDP-MED Sflow Debugging information output Telnet-based remote maintenance NQA DLDP Virtual Cable TestLoopback detection

Bài viết Thiết bị Switch H3C L3 LS-5560S-28S-SI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L3 LS-5560S-28P-SI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:15:20 +0000

Thông số kỹ thuật

Item	S5560S-28P-SI
Port switching capacity	56 Gbps
Packet forwarding rate	42 Mpps
CPU	1 Core, 800MHz
Dimensions (H × W × D)	43.6 × 440 × 160 mm
Weight	< 2.5 kg
Management Ethernet ports	1 console port
SDRAM/Flash	512MB/256MB
Maximum stacking num	9
Stacking bandwidth	16
Service ports	24× 10/100/1000Base-T autosensing Ethernet ports 4× SFP ports
Power consumption	MIN: AC 9W MAX: AC 23W
Operating temperature	0ºC to 45ºC (32°F to 113°F)
Operating humidity	10% RH to 90% RH, non-condensing
Link aggregation	1G/10G port aggregation Static aggregation Dynamic aggregation Multichassis link aggregation
Jumbo frame	10,000 byte
MAC address table	Blackhole MAC address MAC learning limit
Flow control	802.3x flow control and half-duplex backpressure
VLAN	Port-based VLAN QinQ Voice VLAN MAC VLAN
ARP	ARP Detection ARP speed limit
ND	Supported
VLAN virtual port	Supported
DHCP	DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Option82
DNS	Static and Dynamic DNS IPV4 and IPV6
Routing protocols	IPV4/IPV6 static routing RIP/RIPng, OSPFV1/V2/V3
Strom suppression	Storm suppression based on port bandwidth percentage Storm suppression based on PPS Storm suppression based on BPS Broadcast traffic/Multicast traffic/Unknown unicast traffic suppression
Layer 2 ring network protocol	STP/RSTP/MSTP STP Root Protection Smart Link RRPP
Mirroring	Flow mirroring Port mirroring
QoS/ACL	Packet filter Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR Bidirectional ACL Port-based speed limiting Flow redirection Time-range 802.1p priority mapping and DSCP priority mapping
Layer 2 ring network protocol	STP/RSTP/MSTP/PVST+/RPVST STP Root Protection Smart Link RRPP
Multicast	GMP Snooping v1/v2/v3 and MLD Snooping v1/v2 IGMP v1/v2/v3 and PIM-SM/PIM-SSM/PIM-DM
Security	Hierarchical user management and password protection MAC-based authentication 802.1X authentication RADIUS authentication, HWTACACS authentication SSH2.0 Port isolation Port security IP source guard Dynamic ARP detection BPDU guard and root guard HTTPs l EAD
Loading and upgrading	Loading and upgrading through FTP/TFTP
Management and maintenance	Configuration from CLI Login through Telnet, and the console port Simple Network Management Protocol (SNMP) Remote Monitoring (RMON) IMC network management system WEB management System log Alarming based on severity IRF2 NTP LLDP, LLDP-MED Sflow Debugging information output Telnet-based remote maintenance NQA DLDP Virtual Cable Test Loopback detection
Ordering
Product ID	LS-5560S-28P-SI-GL
Product Description	*H3C S5560S-28P-SI L2 Ethernet Switch with 2410/100/1000BASE-T Ports and 41000BASE-X SFP Ports,(AC)*

Bài viết Thiết bị Switch H3C L3 LS-5560S-28P-SI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L2+ LS-5120V3-52S-PWR-LI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:11:18 +0000

Thông số kỹ thuật

Fixed ports	48x 10/100/1000Base-T PoE+ Ports 4x SFP+ Ports
Management Ethernet ports	1x RJ-45 console port
Performance
Switching capacity	176 Gbps
Packet forwarding rate	130.952 Mpps
Feature
VLAN	Port-based VLAN QinQ Voice VLAN Protocol VLAN MAC VLAN
Link aggregation	GE port aggregation Static aggregation Dynamic aggregation Multichassis link aggregation
Stacking	IRF2
MAC address table	Blackhole MAC address Setting the maximum number of port MAC addresses to be learned
ARP	ARP Detection ARP speed limit
DHCP	DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Option 82
DNS	Static domain name resolution Dynamic domain name resolution for the client IPv4 and IPv6 address
Routing protocols	IPv4/IPv6 static routing RIP/RIPng, OSPFV1/V2/V3
QoS/ACL	Packet filter SP/WRR/SP+WRR queue scheduling Bidirectional ACL Port-based speed limit Traffic-based redirection
Security	Hierarchical user management and password protection SSH2.0 Port isolation 802.1X Port security MAC address authentication IP Source Guard HTTPs EAD
Specification Dimensions
Dimensions (H x W x D)	44 × 40× 4.36 cm
Weight	≤ 6 kg
Power
Input voltage range	AC: The rated voltage range is 100V to 240V, 50/60Hz
Power consumption	MIN: AC: 36W MAX: AC: 467W (PoE 370W)
Operating temperature	-5℃ to 45℃
Operating humidity	5% RH to 95% RH, non-condensing

Bài viết Thiết bị Switch H3C L2+ LS-5120V3-52S-PWR-LI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L2+ LS-5120V3-52S-LI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:06:49 +0000

Thông số kỹ thuật

Fixed ports	48x 10/100/1000Base-T Ports 4x SFP+ Ports
Management Ethernet ports	1x RJ-45 console port
Performance
Switching capacity	176 Gbps
Packet forwarding rate	130.952 Mpps
Feature
VLAN	Port-based VLAN QinQ Voice VLAN Protocol VLAN MAC VLAN
Layer 2 ring network protocols	STP/RSTP/MSTP protocols STP Root Protection RRPP
Link aggregation	GE port aggregation Static aggregation Dynamic aggregation Multichassis link aggregation
Stacking	IRF2
ARP	ARP Detection ARP speed limit
DHCP	DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Option 82
Routing protocols	IPv4/IPv6 static routing RIP/RIPng, OSPFV1/V2/V3
QoS/ACL	Packet filter SP/WRR/SP+WRR queue scheduling Bidirectional ACL Port-based speed limit Traffic-based redirection
Security	Hierarchical user management and password protection SSH2.0 Port isolation 802.1X Port security MAC address authentication IP Source Guard HTTPs EAD
Specification Dimensions
Dimensions (H x W x D)	44 x 23 x 4.36 mm
Weight	≤ 3.5 kg
Power
Input voltage range	AC: The rated voltage range is 100V to 240V, 50/60Hz
Power consumption	MIN AC: 19W MAX AC: 44W
Operating temperature	-5℃ to 45℃
Operating humidity	5% RH to 95% RH, non-condensing

Bài viết Thiết bị Switch H3C L2+ LS-5120V3-52S-LI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L2+ LS-5120V3-52P-PWR-LI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:04:57 +0000

Thông số kỹ thuật

Hãng sản xuất	H3C
Mã sản phẩm	LS-5120V3-52P-PWR-LI-GL
Hardware Specification
Giao diện	48 × 10/100/1000Base-T Ethernet ports 4 × 100/1000 BASE-X SFP ports
Khả năng chuyển mạch	104 Gbps
Tỉ lệ chuyển tiếp	77.4 mpps
Bảng địa chỉ MAC	16K MAC addresses
PoE	370W
Kích thước	440×400 × 43.6 mm
Cân nặng	< 6 kg
Nguồn điện	AC： 100V～ 240V AC， 50/60Hz
Nhiệt độ hoạt động	-5 ° đến 45 ° C
Độ ẩm hoạt động	5% – 95%
Tính năng và dịch vụ
Layer 2 Switching	– STP/RSTP/MSTP – STP Root Protection – RRPP – Port-based VLAN, QinQ, Voice VLAN, Protocol VLAN, MAC VLAN
Layer 3 feature	– Address Resolution Protocol (ARP), ARP Detection,ARP speed limit – DHCP Client, DHCP Snooping, DHCP Relay, DHCP Server, DHCP Option82
Layer 3 Routing	– IPV4/IPV6 static routing, RIP/ RIPng, OSPFV1/V2/V3
Bảo mật	– Hierarchical user management and password protection – SSH2.0 – Port isolation – 802.1X – Port security – MAC address authentication – IP Source Guard – HTTPs
Quality of Service (QoS)/ACLs	– Packet filter – SP/WRR/SP+WRR queue scheduling – Bidirectional ACL – Port-based speed limit – Traffic-based redirection
Quản lý	– Configuration from Command Line Interface (CLI) – Remote configuration from Telnet – Configuration through the console port – Simple Network Management Protocol (SNMP) – Remote Monitoring (RMON) alarms, events, and historical records – iMC network management system – WEB network management – System log – Alarming based on severity – IRF – NTP

Bài viết Thiết bị Switch H3C L2+ LS-5120V3-52P-PWR-LI-GL đã xuất hiện đầu tiên vào ngày VNS.

Thiết bị Switch H3C L2+ LS-5120V3-52P-LI-GL

Công ty Cổ phần Tích hợp Giải pháp mạng Việt Nam — Thu, 02 Oct 2025 02:02:51 +0000

Thông số kỹ thuật

Fixed ports	48x 10/100/1000Base-T RJ45 Ports 4x 1G SFP Ports
Management Ethernet ports	1x RJ-45 console port
Performance
Switching capacity	104Gbps
Packet forwarding rate	77.4Mpps
Feature
VLAN	Port-based VLAN QinQ Voice VLAN Protocol VLAN MAC VLAN
Link aggregation	GE port aggregation Static aggregation Dynamic aggregation Multichassis link aggregation
Stacking	IRF2
MAC address table	Blackhole MAC address Setting the maximum number of port MAC addresses to be learned
ARP	ARP Detection ARP speed limit
DHCP	DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Option 82
DNS	Static domain name resolution Dynamic domain name resolution for the client IPv4 and IPv6 address
Routing protocols	IPv4/IPv6 static routing RIP/RIPng, OSPFV1/V2/V3
QoS/ACL	Packet filter SP/WRR/SP+WRR queue scheduling Bidirectional ACL Port-based speed limit Traffic-based redirection
Security	Hierarchical user management and password protection SSH2.0 Port isolation 802.1X Port security MAC address authentication IP Source Guard HTTPs EAD
Specification Dimensions
Dimensions (H x W x D)	44 x 16 x 4.36 cm
Weight	≤ 3.5 kg
Power
Input voltage range	AC: The rated voltage range is 100V to 240V, 50/60Hz
Power consumption	MIN: AC: 18W MAX: AC: 41W
Operating temperature	-5℃ to 45℃
Operating humidity	5% RH to 95% RH, non-condensing

Bài viết Thiết bị Switch H3C L2+ LS-5120V3-52P-LI-GL đã xuất hiện đầu tiên vào ngày VNS.