| Wireless throughput |
4Gbps |
| Port |
LAN:2*SFP Plus + 12*PoE+
WAN:2 GE
+ 1*USB |
| Power supplies |
100V AC~240V AC:50/60Hz |
| MTBF |
≥50000hours |
| Basic functions |
- Number of managed APs by default 32 ordinary AP or 64 wall-plate AP
- Maximum number of managed APs 64
- Maximum users of authentication 1024
|
| GW Features |
- NAT
- PPPoE
- DDNS
- SSL VPN
- IPSEC VPN
- RIP
- GRE
|
| 802.11MAC |
- 802.11 Protocols
- The number of SSID of whole machine: 32
- SSID hiding
- 11G protection
- 11n only
- Use number limit Supported: SSID based, per RF based
- Keepalive
- Idle
- Multi-country code assignment
- VLAN based wireless users 2-layer isolation, SSID based wireless user 2-layer isolation.
- 20MHz/40MHz auto-switch in 40MHz mode
- Local forwarding based on SSID+VLAN
|
| Roaming |
- Intra-AC, Inter-AP L2 and L3 roaming
- Inter-AC, Inter-AP L2 and L3 roaming
- WIFI5 zero roaming
- WIFI6 zero roaming
- AGV zero roaming
|
| Security |
- Static blacklist
- Dynamic blacklist
- White list
- Rogue AP detection : SSID based, BSSID, device OUI
- Rouge AP countermeasure
- Flooding attack detection
- Spoof attack detection
- Weak IV attack detection
- WIPS/WIDS : 7-layer mobile security
|
| QoS |
- Priority mapping
- L2-L4 packet filtering and traffic classification
- Rate limit Supported with granularity of 8Kbps 802.11e/WMM
- Access control based on user profile
- Intelligent bandwidth limit (equal bandwidth share algorithm)
- Intelligent bandwidth limit (user specific)
- Intelligent bandwidth guarantee
- QoS Optimization for SVP phone
- CAC(Call Admission Control): based on user number/bandwidth
- End-to-end QoS
- AP upload speed limit
|
| CAPWAP |
- Auto AP serial number entry
- AC discovery (DHCP option43, DNS)
- Compatible with LWAPP AP
- IPv6 tunnel
- Clock synchronization
- Jumbo frame forwarding
- Assign basic AP network parameter through AC: Static IP, VLAN, connected AC address
- L2/L3 connection between AP and AC
- NAT traversal between AP and AC
|
| Access control |
- Open system, Shared-Key WEP-64/128, dynamic WEP
- WPA,WPA2,WPA3
- TKIP
- CCMP (11n recommended)
- SSH v1.5/v2.0
- Wireless EAD (End-point Access Domination)
- Portal authentication Supported: Remote Authentication, external server
- Portal page redirection: SSID based, AP Portal page push
- Portal by-pass Proxy
- 802.1x authentication: EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-MD5, EAP-SIM, LEAP, EAP-FAST, EAP offload (TLS, PEAP only)
- Local authentication: 802.1X, Portal, MAC authentication
- LDAP authentication: 802.1X and Portal, EAP-GTC and EAP-TLS supported by 802.1X login
- AP location-based user access control
- Guest Access control
- VIP channel
- ARP attack detection: Wireless SAVI
- SSID anti-spoofing: SSID + user name binding
- AAA server selection based on SSID and domain
- AAA server back up
- Local AAA server for wireless user
- TACACS+
|
| RF management |
- Country code lock
- Static channel and power configuration
- Auto channel and power configuration
- Auto transmission rate adjustment
- Coverage hole detection and correction
- Load balancing: based on traffic, user & frequency (dualfrequency supported)
- Intelligent load balancing
- AP load balancing group : auto-discovery and flexible setting
|
| Layer 2 protocol |
- ARP (gratuitous ARP)
- 802.1p
- 802.1q (Maximum VLANs: 4094)
- 802.1x
|
Reviews
There are no reviews yet.